| |
 |
 |
 |
 |
 |
 |
|
|
Micro Hardness Tester |
|
|
| |
|
|
|
 |
|
|
|
|
| |
|
Koopa Micro Hardness Tester is a full
automatic and modern hardness tester, based on ASTM E384,
DIN/ISO 6507 standards with high resolutions optic and advanced
digital control, capable of high speed, accurate, and repeatable
hardness testing. Force is applied with a servo system with 0.2
gr accuracy and movement of the cross table.
Positioning the test point and measurement of
the indentation diameter with 1 micron accuracy is achievable.
The calibration is easily done with 1 kg weight and digital
micrometer.
Applied force is shown online and it is
possible to transfer the video of the test point to the computer
by using CCD.
|
 |
|
|
|
Features |
| |
Easy Use and Full Automatic Operation
|
Wide Range of Force Application
|
Hardness Testing Calculation with
Computerized Software |
|
 |
| |
High Accuracy in Measuring of Force,
Displacement and Hardness Calculation |
Competitive Price
|
Display of Indentation Depth in all Scales
|
|
|
|
| |
Hardness Conversion to other Scales
|
Maximum, Minimum, Average, Range,
and Standard Deviation |
1600 Storage Memory each Contains 9 Tests
|
|
|
|
| |
User Calibration |
Menu Operation-Based |
Large LCD with Backlight |
|
|
|
| |
USB Port to Transfer Data to Flash Memory
|
Based on ASTM, NIST, and DIN Standards
|
Based on ISO 9000 Standard System Requirements |
|
| |
|
|
|
|
|
|
Technical Specification |
| |
Operation Principle
Based on ASTM E384 and ASTM E92
Standards
|
Indenter Weight
T1,2 with 5 gr
T3 with 1.2 gr
T4 with 0.6 gr |
Statistical
Minimum, Maximum, Average, Range,
and Standard Deviation
|
|
|
|
| |
Load Application
10 gr to 2 kg with 0.1% Accuracy |
Force Application Speed
50 μm/s |
Dwell Time
0 to 99 s |
|
|
|
| |
Force Measurement
3 kg Loadcell with 0.1 gr Accuracy |
Magnification
40x, 100x, and 400x (1000x Optional) |
Indentation Diameter Measuring
2 cm |
|
|
|
| |
Calibration
1 kg and 1 μm Gauge Blocks
|
Statistical
Minimum, Maximum, Average, Range, and
Standard Deviation
|
Unit Conversion
Based on DIN 50150 and ASTM E140
Standards |
|
|
|
| |
Supplementary Information
Indentation Depth Display with 0.1 μm
Accuracy and Online Applied Force Display
with 1 gr Accuracy |
Memory
1600 Memory Storage each Contains
Minimum, Maximum, Average, Range,
Standard Deviation, and a Code |
Menus
Main Menu, Memory Menu, Flash Memory,
Jog Menu, Calculation Menu,
and Calibration Menu |
|
|
|
| |
Vertical Displacement of Anvil
Minimum 300 mm with 10 μm Accuracy
(Manual and Automatic)
|
Horizontal Displacement of Anvil
Minimum 20 mm with 1 μm Accuracy
|
Workpiece Height
4 cm
|
|
|
|
| |
Workpiece Width
15 cm
|
Power Supply
220 VAC, 50 Hz, and 50 W
|
Output Port
USB Port to Transfer Data to Flash Memory
|
|
| |
|
|
|
|
|
|
Unique Advantages |
| |
Automatic Operation in whole Hardness Procedure |
Force Application with 0.2 gr Accuracy
|
Accurate Indenter's
Displacement Measuring with 0.1 um |
|
|
|
| |
Indentation
Depth Display
|
Indentation
Depth Conversion to other
Scales |
Calibration of System's Parameters by User
|
|
| |
|
|
|
|
|
|
Accessories |
| |
Vickers Indenter |
4x, 10x, and 40x Standard Object Lenses |
HV1 Standard Hardness Gauge Block |
|
|
|
| |
1 kg Gauge Block |
User Manuals and Other Documents |
ASTM E384 Standard Manual |
|
| |
|
|
|
|
|
|
Optional Accessories |
| |
100x Object Lenses
|
Hardness Testing Standard Blocks
with UKAS Certificate |
Hardness Testing Standard Blocks
without UKAS Certificate |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
Copyright © 2011 Koopa Pazhoohesh Co. All rights reserved. |
|