| |
 |
 |
 |
 |
 |
 |
|
|
ATH Hardness Tester |
|
|
| |
|
|
|
 |
|
|
|
|
| |
|
Koopa ATH Hardness Tester is
designed and manufactured for online and full automatic hardness
testing. It's conveyor can be put in series with the production
line's conveyor. This hardness tester is equipped with one
milling head for polishing the workpiece surface and one
hardness tester head for hardness testing based on Rockwell,
Superficial Rockwell, Brinell, and Vickers Standards. Milling
and Hardness Tester heads can move horizontally over the
workpiece in a way that the axes of each head can stay over the
test point.
Workpiece position recognition, conveyor movement, and all
slider's movement is automatically done with microcontrollers.
All settings, movements, and results
can be seen,
control, and set on monitor. This hardness tester is used for
CNG capsules, pipes and cast workpieces upto 800kg.
|
 |
|
|
|
Features |
| |
Manual, Half-Automatic, and Full-Automatic modes |
|
 |
| |
Operation in Full-Automatic mode
1- Automatically conveying of workpiece under device head
2- Automatic milling
3- Automatic hardness testing
4- Automatically exiting of workpiece over the conveyor
5- Automatically storing of results in a file
6- Automatically repeat of steps 1 to 5
|
|
|
|
| |
Operation in Half-Automatic mode
1- Putting the workpiece under the device head by operator
2- Automatic milling
3- Automatic hardness testing
4- Pick up of workpiece by the operator
5- These steps are done just once
|
|
|
|
| |
Operation in Manual mode
1- Putting the workpiece under the device head by operator
2- Manual milling control by operator
3- Manual hardness testing control by operator
4- Pick up of workpiece by the operator
|
|
|
|
| |
Setting of nominal speed and acceleration time for each slider |
|
|
|
| |
Methods of hardness
testing head control
1- With keyboard and LCD display screen installed on hardness tester
2- With computerized software |
|
|
|
| |
Methods of hardness testing
1- 15 Rockwell methods
2- 15 Superficial Rockwell methods
3- 10 Vickers methods (1 to 120 kg)
4- All Brinell methods upto 187.5 kg
|
|
|
|
| |
Rotation of workpiece and hardness testing in different angles |
|
|
|
| |
Manual control panel |
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
| |
Copyright © 2011 Koopa Pazhoohesh Co. All rights reserved. |
|